Home > News > Industry News > Analytical methods for smart l.....
Browse Categories
Mortise Lock(274)
Rim lock(23)
Lock Accessory(18)
Door Closer(11)
Drawer Lock(49)
Pad Lock(32)
Chain Lock(18)
other Hardware(19)
New Products(20)
Contact us
TEL  :86-512-88602270 FAX  :86-512-67875568  :website@group-connection.com Adress:No.7816, MuDong Road, WuZhong District, Suzhou City,Jiangsu Provi...Contact Now


Analytical methods for smart lock durable

  • Author:root hardware
  • Release on :2016-08-25

     Smart lock means different from the traditional mechanical lock, user identification, security, manageability more intelligent locks. Door Manufacturers

1, clock calibration

For internal clock locks intelligent lock system is very important, about the accuracy will affect the use of a key card, regular inspection and timely calibration becomes very important, timely calibration, set the clock with the same method. When the door lock for maintenance, if the power more than 10 minutes, it should be in service after the reset lock clock. China Locks Factory

2, filling oil

As a main door lock cylinder mechanical structure, naturally we can not ignore maintenance. Found less flexible cylinder or can not maintain the correct position, then it should be filled with oil to the cylinder:

Remove the side trim, to the grease gun cylinder fuel injection, turn the handle and the knob until the flexible lock up.

3, check the lock body and locking plate gap

Lock body and locking plate with the gap also requires timely examination, the level of cooperation with the locking latch plate hole is not consistent with the best door and frame with the gap is 1.5mm-2.5mm. If not, it is necessary to adjust the position of the door hinge or latch plate. Also note that thermal expansion and contraction caused by the weather, to ensure that the gap door and frame, lock and latch plate appropriately.

4. Prepare mechanical key lock

After a long time to go out, because the battery is depleted to avoid the encounter intelligent lock strike caused ready mechanical key can not be ignored. After remember open the door, but also remember to change the locks of the battery to restore normal function. Door hardware manufacturer